Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
JavaAPI - Display Geometry
Posted 13 nov. 2012, 11:50 UTC−5 Version 4.3a 2 Replies
Please login with a confirmed email address before reporting spam
I try to display only the geometry for a loaded problem within a java api.
Displaying the results for any problem works fine after implementing the steps from COMSOLJavaAPIReferenceGuide.pdf section Graphical User Interfacse, but showing only the geometry drives me crazy.
I've also tried to plot a geometry within a result-plot without defining a mesh or study.
Thefore I've created a solution selecting a Model=Model1 and Frame=Geometry(x,y,z), but no Plot is generated. Not even in Comsol, so I think displaying the geometry in the JavaAPI is not possible.
I'm not sure if this missing part should be considered as a bug or a missing feature.
Can anyone help?
Attachments:
Hello Matthias Juettner
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
You're right. There is no built in support for showing the geometry in the COMSOL API.
The trick is to create a mesh of the boundaries of you model and create a mesh plot using a uniform colour. You can show a mesh plot without having solved your model!
--
Lars Gregersen
Comsol Denmark