Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
unknown constant displacement at each node of mesh as a BC
Posted 24 sept. 2012, 16:37 UTC−4 Structural Mechanics Version 4.1 0 Replies
Please login with a confirmed email address before reporting spam
in my analysis 2D(x-y) domain is presnt , but during simlation it must be forced to behave 1D(x)
on boundary 1 : U=0
on boundary 2 V=0
on boundary 3 U=0 and V i = V j
on the boundary 3 at each node the vertical displacement must be forced to be equal at each nodes ..
my gemoetrry has 300 nodes along boundary 3..and all nodes must have same V displacement
i cannot do with prescribed displacement because i do not know h0w much to prescribe
the solution has to give the displacemnt at boundary 3 such that all nodes on it must have same V displacement
how can i do this..i have been trying to use different options..but not successful
many thanks in advance
pavan
Hello Pavan Kumar Penumakala
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.