Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Which physics interface of AC/DC module should be used for Stray Inductance extraction of a multi-layer power module made of GaN ?
Posted 18 août 2022, 04:03 UTC−4 Modeling Workflow, Physics Interfaces Version 6.0 2 Replies
Please login with a confirmed email address before reporting spam
I want to extract the Stray Inductance or Parasitic Inductance of a power modue and need to export it for the SPICE model. Which physics interface in the COMSOL multiphysics AC/DC module should be considered for this kind of simulations ?
Please login with a confirmed email address before reporting spam
Dear Phanindra,
you can check out the following Blog post about Extracting Electrical Circuits from Electromagnetics Simulations https://www.comsol.de/blogs/extracting-electrical-circuits-from-electromagnetics-simulations/ This Blog contains a step-by-step instruction on how to perform such tasks. I hope this will be helpful!
Best wishes, Philipp
Please login with a confirmed email address before reporting spam
Dear Phanindra,
you can check out the following Blog post about Extracting Electrical Circuits from Electromagnetics Simulations
This Blog contains a step-by-step instruction on how to perform such tasks. I hope this will be helpful!
Best wishes, Philipp
Thank you for sharing the link . I had gone through the blog and got some idea about using the different interferences based on reqquiement.