Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Setting a Constant Temperature on Edge of Cylinder

Posted 16 août 2012, 10:27 UTC−4 Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) Version 4.2 0 Replies

Ryan Sikorski
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am modeling the flow of a liquid in a pipe, with another liquid being injected and mixing, they are at different temperatures.

I imported a Rod I drew in Solid works, I'm injecting a fluid into the rod. The rod is a fluid but my understanding was I need to model it as a whole solid domain (Though this seems dubious to me).

When selecting the boundary conditions I would like the outer edge of the rod to be a constant temperature, but it appears it makes the entire rod always that temperature not just the outside. Do I need to create a very thin layer in my model on the outside of the rod? Or am I fundamentally doing this incorrectly?

Thanks.
0 Replies Last Post 16 août 2012, 10:27 UTC−4
COMSOL Moderator

Hello Ryan Sikorski

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content