Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Sellmeier dispersion model in Electromagnetic waves, transient interface

Posted 23 févr. 2022, 19:39 UTC−5 Wave Optics, Modeling Tools & Definitions, Equation-Based Modeling 1 Reply

Erick Ramón Baca Montero
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is it possible to use the Sellmeier dispersion model to specfiy the refractive index of materials in the electromagnetic waves, transient interface?

I am trying to model the propagation of an ultrashort pulse (femtoseconds) through a Schott glass whose refractive index is defined by a set of Sellmeier coefficents.

Is there a way to achieve this? Any suggestions?

Thanks

1 Reply Last Post 24 févr. 2022, 03:44 UTC−5
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 24 févr. 2022, 03:44 UTC−5
Updated: 3 years ago 24 févr. 2022, 04:10 UTC−5

Hi,

in the frequency domain you can use a frequency (or wavelength) dependent refractive index. So you could run a frequency sweep over the bandwidth of the pulse with suitable window function and do an iFFT into the time domain. This should be quite straightforward, but only works if the material is linear.

An external material directly in the time domain may be another option, but this will probably be a hairy thing.

Just saw that Sellmeier is even directly available in frequency domain.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi, in the frequency domain you can use a frequency (or wavelength) dependent refractive index. So you could run a frequency sweep over the bandwidth of the pulse with suitable window function and do an iFFT into the time domain. This should be quite straightforward, but only works if the material is linear. An external material directly in the time domain may be another option, but this will probably be a hairy thing. Just saw that Sellmeier is even directly available in frequency domain. Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content