Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

getting the temperature at a specific point

Posted 3 mai 2021, 18:44 UTC−4 1 Reply

Bilal Bukhari
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Can someone please share how to get the temperature at a specific point in the geometry after simulation

1 Reply Last Post 3 mai 2021, 18:56 UTC−4
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 3 mai 2021, 18:56 UTC−4

If you defined the point in advance, you can do a "point plot" at that selected point, directly in post processing. If you didn't define your point in advance, you can still create one as an evaluation point (that is, as a "Cut Point" in either 1D, 2D, or 3D) and then do a Point Plot at that Cut Point. If you are still having trouble, feel free to post your model and say where (in the geometry) your point of interest is, and someone here will be happy to tell you exactly what you need to do to plot the temperature there. And, if it has more than one value (such as a temperature varying with time), you can make a plot of that too. There are many ways to deal with it.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
If you defined the point in advance, you can do a "point plot" at that selected point, directly in post processing. If you didn't define your point in advance, you can still create one as an evaluation point (that is, as a "Cut Point" in either 1D, 2D, or 3D) and then do a Point Plot at that Cut Point. If you are still having trouble, feel free to post your model and say where (in the geometry) your point of interest is, and someone here will be happy to tell you exactly what you need to do to plot the temperature there. And, if it has more than one value (such as a temperature varying with time), you can make a plot of that too. There are many ways to deal with it.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content