Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to compute forces on a moving fluid-fluid interface?
Posted 28 janv. 2010, 09:18 UTC−5 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I’m using Comsol Multiphysics 3.5a to model the formation of an oil droplet from a single pore. The droplet is carried away by a continuous phase(water) which flows parallel to the opening of the pore. I’m using Level Set method in order to track the moving oil-water interface. How can I do to compute the total viscous forces exerted by water on the droplet surface? Shall I use Matlab Interface? And in this case, which commands are useful to carry out this operation?
Many thanks
Giuliana
I’m using Comsol Multiphysics 3.5a to model the formation of an oil droplet from a single pore. The droplet is carried away by a continuous phase(water) which flows parallel to the opening of the pore. I’m using Level Set method in order to track the moving oil-water interface. How can I do to compute the total viscous forces exerted by water on the droplet surface? Shall I use Matlab Interface? And in this case, which commands are useful to carry out this operation?
Many thanks
Giuliana
1 Reply Last Post 29 janv. 2010, 02:49 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Tricky question you have there, as with the Level Set method you do not have a geometrical surface defined to integrate over as for the other models methods.
Basically, I would look into how to define the surface to integrate the stress over it, or use the droplet volume and try out a "work" approach to get hold of the boundary presure.
Pls keep us informed I find your question is very interesting, the solution will be to
Good luck
Ivar
Tricky question you have there, as with the Level Set method you do not have a geometrical surface defined to integrate over as for the other models methods.
Basically, I would look into how to define the surface to integrate the stress over it, or use the droplet volume and try out a "work" approach to get hold of the boundary presure.
Pls keep us informed I find your question is very interesting, the solution will be to
Good luck
Ivar