Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
initial solution problem
Posted 12 mai 2012, 16:06 UTC−4 Studies & Solvers Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
In a time dependent model I input a parameter as a function contains logarithmic part. put the program stopped at the initial step because there is a large difference between initial value and boundary value so the program give me fluctuated values beside the boundary ,where some values reaches to negatives .so the logarithmic part of the function gives error
1 Reply Last Post 12 mai 2012, 16:27 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I then believe you have no other way out than estimate better the solution from some hand calculations, and define your initial conditions closer to the final ones, and check that yourmesh is fine enough to orrectly solve the gradients you have, even (or probably specially) in log mode
--
Good luck
Ivar
I then believe you have no other way out than estimate better the solution from some hand calculations, and define your initial conditions closer to the final ones, and check that yourmesh is fine enough to orrectly solve the gradients you have, even (or probably specially) in log mode
--
Good luck
Ivar