Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Electric spark simulation

Posted 9 févr. 2021, 01:04 UTC−5 Electromagnetics, Low-Frequency Electromagnetics, Wave Optics 3 Replies

Jay Fultariya
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all

Any one can suggest how can i do electric spark/arc simulation ?

3 Replies Last Post 29 avr. 2021, 13:22 UTC−4
Dennis Brown
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 9 févr. 2021, 17:04 UTC−5

There may be a couple ways to do this. One would be just plotting field strength levels in electrostatics module. Same with ACDC. By knowing field strength levels you could infer at about what point arcing would occur. You are not simulating the arc itself. If you are wanting to do this so that you see the physical arc during breakdown, then that is more of a plasma/multitphysics problem. it is not an easy setup at all. There might be related examples on in the gallery or maybe the comsol blog but I don't know offhand.

There may be a couple ways to do this. One would be just plotting field strength levels in electrostatics module. Same with ACDC. By knowing field strength levels you could infer at about what point arcing would occur. You are not simulating the arc itself. If you are wanting to do this so that you see the physical arc during breakdown, then that is more of a plasma/multitphysics problem. it is not an easy setup at all. There might be related examples on in the gallery or maybe the comsol blog but I don't know offhand.
Jay Fultariya
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 27 avr. 2021, 01:12 UTC−4

Thanks

Thanks
Christopher Boucher COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 29 avr. 2021, 13:22 UTC−4

Hi Jay, the Plasma Module includes an "Electrical Breakdown Detection" interface that predicts where electrical discharge may occur, including streamer discharge.

One example is the "Electrical Breakdown Between Spheres" tutorial: https://www.comsol.com/model/electrical-breakdown-between-spheres-74081

As Dennis pointed out above, approaches like this one can be used to predict whether there will be any breakdown, but actually modeling the breakdown process in detail is much more difficult.

Hi Jay, the Plasma Module includes an "Electrical Breakdown Detection" interface that predicts where electrical discharge may occur, including streamer discharge. One example is the "Electrical Breakdown Between Spheres" tutorial: https://www.comsol.com/model/electrical-breakdown-between-spheres-74081 As Dennis pointed out above, approaches like this one can be used to predict whether there will be any breakdown, but actually modeling the breakdown process in detail is much more difficult.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content