Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

help for time dependent heat source

Posted 11 avr. 2012, 05:35 UTC−4 Heat Transfer & Phase Change, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2, Version 4.2a 4 Replies

Joaquim Har
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hello,

I am a newbie in comsol things, however, have already ansys experience.

I am looking for a possibility of a physical time-dependent heat source (0-10s [0 W], 10-20s [1000 W], 20-1000s [0 W]) raise. I've seen in comsol there is a rectangular function, I could use this function. and how exactly?

is there a tutorial for such a case?

Thank you. jojo
4 Replies Last Post 13 avr. 2012, 08:01 UTC−4
Harmke van der Velde
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11 avr. 2012, 09:32 UTC−4
Maybe you can use a step function 2 times. The first up at 10 s and the second a step down at 20 s.
Than use this function in the boundary conditions.
Maybe you can use a step function 2 times. The first up at 10 s and the second a step down at 20 s. Than use this function in the boundary conditions.
Rahul Borhade
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12 avr. 2012, 01:56 UTC−4
you may try interpolation function, just right click on global definitions in model builder window then click on interpolation function, there you can specify any quantity varying with time.
you may try interpolation function, just right click on global definitions in model builder window then click on interpolation function, there you can specify any quantity varying with time.
Joaquim Har
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13 avr. 2012, 05:32 UTC−4
hello,

I myself have found a solution, I have a rectangular function and a parameter defined with the heat source and a time-dependent variable with the rectangular function, then I have to load the model heat source definition of the multiplikation of variable and parameter.

But I have a new question:

When I model at a certain point or surface temperature is reached a previously known, is an additional load to be applied, so to speak a kind of chain reaction.

sure someone has a tip?

Thank you. jojo
hello, I myself have found a solution, I have a rectangular function and a parameter defined with the heat source and a time-dependent variable with the rectangular function, then I have to load the model heat source definition of the multiplikation of variable and parameter. But I have a new question: When I model at a certain point or surface temperature is reached a previously known, is an additional load to be applied, so to speak a kind of chain reaction. sure someone has a tip? Thank you. jojo
Harmke van der Velde
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13 avr. 2012, 08:01 UTC−4
Maybe you can use a kind of control function.
An example of a PID control you can find here: www.comsol.com/showroom/gallery/866/

I'm not sure if this is what you are looking for.
Maybe you can use a kind of control function. An example of a PID control you can find here: http://www.comsol.com/showroom/gallery/866/ I'm not sure if this is what you are looking for.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content