Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heaters on/off system

Please login with a confirmed email address before reporting spam

Hello dears,

My question is it possible to model a device/function in Comsol that controls when Heat Source should on/off depends on the temperature of the system. For example I want to keep specific object in temperature range and o If the specific object is operational, heaters should turn on if temperature drops below -15 C and then turn off once it’s above -10 C.

Maybe somebody had same issue and could assist on it? Thank you in advance for any information that could be useful to solve this task.


1 Reply Last Post 15 déc. 2020, 10:38 UTC−5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 15 déc. 2020, 10:38 UTC−5

Hi Lev,

Yes, we have a blog post on exactly that topic.

Best,

Jeff

-------------------
Jeff Hiller
Hi Lev, Yes, we have a [blog post](https://www.comsol.com/blogs/implementing-a-thermostat-with-the-events-interface) on exactly that topic. Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.