Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Beam envelope requirement for refractive index

Please login with a confirmed email address before reporting spam

Using the wavelength domain to study in beam envelope,when the refractive index is not 1 but 2 or 3 or bigger in beam envelope, the input signal is not seam as you set the input signal. For example, when the input electric filed is 1, the input signal of a one-dimensional map is not 1 after calculating, and the value of the input electric filed is gradually reduced lower 1 as the refractive index value increasing. When the refractive index and input electric filed are 2 and 1 respectively, a maximum of one dimensional map of the input electric filed to reach between 0.7 and 0.8. The frequency domain electromagnetic waves will not appear this problem, why this problem exisits in the beam envelope? Whether the electromagnetic wave beam envelope should not be used for the study of refractive index is greater than 1 medium?


0 Replies Last Post 13 nov. 2020, 04:53 UTC−5
COMSOL Moderator

Hello Yunyun Lai

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.