Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Initial Value for Strains

Posted 2 août 2020, 11:37 UTC−4 Structural & Acoustics, Structural Mechanics Version 5.4 1 Reply

Mohammad Kazemi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I need to specify initial values for strains inside a domain such that the current geometry has some stress-free prescribed strains.

Could anyone give a hint on how to do so.

Thanks, Mo

1 Reply Last Post 4 août 2020, 16:40 UTC−4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 4 août 2020, 16:40 UTC−4

Hello Mohammad,

Check under File > Licensed and Used Products, whether your license includes the Structural Mechanics Module, the MEMS Module, the Acoustics Module, the Multibody Dynamics Module or the Metal Processing Module. If it does, you will be able to add an "Initial Stress and Strain" node to your model by right click on the Linear Elastic Material node in the Model Builder (See attached screenshot). If it does not, consider contacting your COMSOL representative to add one of those products.

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Mohammad, Check under File > Licensed and Used Products, whether your license includes the Structural Mechanics Module, the MEMS Module, the Acoustics Module, the Multibody Dynamics Module or the Metal Processing Module. If it does, you will be able to add an "Initial Stress and Strain" node to your model by right click on the Linear Elastic Material node in the Model Builder (See attached screenshot). If it does not, consider [contacting your COMSOL representative](https://www.comsol.com/contact/) to add one of those products. Best regards, Jeff

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content