Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Periodic Conditions
Posted 15 févr. 2012, 01:57 UTC−5 Geometry, Studies & Solvers, Structural Mechanics Version 4.2, Version 4.2a 3 Replies
Please login with a confirmed email address before reporting spam
I'm trying to solve a problem with periodic boundary conditions. If I set periodic conditions with the type of continuity on a geometry of a cube, and then a prescribed displacement on a face, then the cube moves in space, but does not experience deformation because the displacement of 2 opposite faces is equal.
Does anyone know how i can set periodic conditions such that the the cube will experience deformation?
In the model library of Comsol there is an example of Floquet periodicity, but I haven't seen one of continuity...
Thanks
Please login with a confirmed email address before reporting spam
for me it sounds like you have "antiperiodical" loads, but you want symmetry, no ?
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
U_right - U_left = (F - I ) *X
where F is the deformation gradient, U_left and U_right are the displacements of the left and right faces of the cube, I is the identity tensor and X is the distance between the faces.
However, i'm not sure of how to impose this condition...
Please login with a confirmed email address before reporting spam
I believe that is what the "solid" physics "Periodic condition BC" imposes (the underlaying equation is slightly cryptic with "if" and "src & dst" names).
Then up to you to decide how many DoF you constrain, and how they are aligned w.r.t the global coordinate transform
--
Good luck
Ivar