Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Periodic mesh
Posted 11 févr. 2012, 21:07 UTC−5 Mesh Version 3.5a 1 Reply
Please login with a confirmed email address before reporting spam
Hello all,
I would like to generate a periodic mesh on a square geometry. Indeed, I apply periodic bounday conditions but I obtain some strange behavior close to the boundaries (even with a very fine mesh). I guess it comes from the mesh which is not periodic.
Here is a picture from what I get: dl.free.fr/tqq8HVFqH
Is it possible to get a periodic mesh?
Best regards,
I would like to generate a periodic mesh on a square geometry. Indeed, I apply periodic bounday conditions but I obtain some strange behavior close to the boundaries (even with a very fine mesh). I guess it comes from the mesh which is not periodic.
Here is a picture from what I get: dl.free.fr/tqq8HVFqH
Is it possible to get a periodic mesh?
Best regards,
1 Reply Last Post 12 févr. 2012, 06:27 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
in V4.2a you have an interesting copy and mirror mesh feature, nothing like that in 3.5a
--
Good luck
Ivar
in V4.2a you have an interesting copy and mirror mesh feature, nothing like that in 3.5a
--
Good luck
Ivar