Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Feedback control during time-dependent simulation
Posted 8 avr. 2020, 06:12 UTC−4 Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers 1 Reply
Please login with a confirmed email address before reporting spam
Hello, I would be curious to hear if it is possible to somehow implement feedback in Comsol, particularly in time-dependent/transient pressure acoustics simulations. What that concretely means: I would like to use the value of the dependent variable (pressure) at x0 at the current timestep of the simulation as the input of a point source in a different location x1. Is this possible to do within Comsol? Currently, my only idea would be to somehow run the simulation for one time-step t_n, extract P(x0,t_n) to use it as input at x1, and then restart the simulation with the result of the time-step t_n as the initial condition of the current time-step t_n+1. I have not tried this, but it sounds awefully complicated and computationally slow. Are there other ways to implement such feedback?
Thanks a lot,
Theo
Please login with a confirmed email address before reporting spam
Hi Theo, you may want to get started here: https://www.comsol.ch/blogs/optimizing-pid-controller-performance-with-comsol-multiphysics Best regards Sven