Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary Distance Variable in Comsol 4

Posted 3 janv. 2012, 12:17 UTC−5 Fluid & Heat, Computational Fluid Dynamics (CFD) Version 3.5a, Version 4.2, Version 4.3 4 Replies

Rui Silva
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi folks,

I have been searching in the manual but I can't seem to find the boundary distance variable in Comsol 4.

I have used it in comsol 3.5a, and I need to use it again.

Can someone direct me to the name used in version 4? Or has it been replaced?

Best regards,

Rui
4 Replies Last Post 7 sept. 2012, 16:06 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 3 janv. 2012, 14:33 UTC−5
Hi

in my v4.2a help file I have a "Wall Distance Interface" or "wd" wariable, try a search


--
Good luck
Ivar
Hi in my v4.2a help file I have a "Wall Distance Interface" or "wd" wariable, try a search -- Good luck Ivar
Rui Silva
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 4 janv. 2012, 06:50 UTC−5
Thks Ivar!

I have found it!

Gonna try to implement it!

Best Regards,

Rui
Thks Ivar! I have found it! Gonna try to implement it! Best Regards, Rui
Shawn.F
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 sept. 2012, 13:30 UTC−4

Ivar,

I am trying to use "wd", but I cannot get the convergence. The model is two phase flow, and I coupled it with wall distance. I need the "wd" model to find the distance of the points of the domain to the wall, in order to monitor if the droplet touches the wall or not. Do you have any suggestion how to make it work? Am I allowed to couple wall distance with two phase flow or not?

Thanks
--
Shawn
Ivar, I am trying to use "wd", but I cannot get the convergence. The model is two phase flow, and I coupled it with wall distance. I need the "wd" model to find the distance of the points of the domain to the wall, in order to monitor if the droplet touches the wall or not. Do you have any suggestion how to make it work? Am I allowed to couple wall distance with two phase flow or not? Thanks -- Shawn
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 sept. 2012, 16:06 UTC−4
Hi

sorry but that one I do not know ;)
and I'm far away from my COMSOL workstation so I cannot try and test it out, but there are others out here ;)

--
Good luck
Ivar
Hi sorry but that one I do not know ;) and I'm far away from my COMSOL workstation so I cannot try and test it out, but there are others out here ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content