Please login with a confirmed email address before reporting spam
Posted:
5 years ago
16 janv. 2020, 09:37 UTC−5
The attached file is a few version old (Comsol 4.3) but should give you a good grounding in the different ways to model coils in Comsol.
Of course, more recent versions of Comsol may have slightly different methods and capabilities.
Good luck!
The attached file is a few version old (Comsol 4.3) but should give you a good grounding in the different ways to model coils in Comsol.
Of course, more recent versions of Comsol may have slightly different methods and capabilities.
Good luck!
Sergei Yushanov
Certified Consultant
Please login with a confirmed email address before reporting spam
Posted:
5 years ago
16 janv. 2020, 12:37 UTC−5
Sanchayan,
Attached is working model.
Regards,
Sergei
Sanchayan,
Attached is working model.
Regards,
Sergei
Please login with a confirmed email address before reporting spam
Posted:
5 years ago
17 janv. 2020, 05:16 UTC−5
Hello ,
Thanks for instant replys.
@Mortal . It's V5.4
@Sergei Thanks for your time, but still i have issue.
I'm simulating this result for the purpose of building a Gradient coil for MRI.
Means i will end up using multiturns of coils.
Your setting on conductor model is : Single conductor.
How to implement it on multi turn coil.
When i implemented it on multi turn coil , i get the error
" Could not determine the center of the circular coil ".
Regards
Hello ,
Thanks for instant replys.
@Mortal . It's V5.4
@Sergei Thanks for your time, but still i have issue.
I'm simulating this result for the purpose of building a Gradient coil for MRI.
Means i will end up using multiturns of coils.
Your setting on conductor model is : Single conductor.
How to implement it on multi turn coil.
When i implemented it on multi turn coil , i get the error
" Could not determine the center of the circular coil ".
Regards
Sergei Yushanov
Certified Consultant
Please login with a confirmed email address before reporting spam
Posted:
5 years ago
17 janv. 2020, 07:54 UTC−5
Sanchayan,
Attached is multiturn coil.
Regards,
Sergei
Sanchayan,
Attached is multiturn coil.
Regards,
Sergei
Please login with a confirmed email address before reporting spam
Posted:
5 years ago
17 janv. 2020, 08:08 UTC−5
Updated:
5 years ago
17 janv. 2020, 08:30 UTC−5
Sanchayan,
Attached is multiturn coil.
Regards,
Sergei
hei
You have answered the original question.
Big thanks.!!!
Now im trying to build by myself more complex model.
Can i ask a geometry question.
At your model the selection happens on whole domain attribute.
when im developing the selection happens on faces of the shape attribute.
Where im doing it wrong.
Regards
>Sanchayan,
>
>Attached is multiturn coil.
>
>Regards,
>
>Sergei
hei
You have answered the original question.
Big thanks.!!!
Now im trying to build by myself more complex model.
Can i ask a geometry question.
At your model the selection happens on whole domain attribute.
when im developing the selection happens on faces of the shape attribute.
Where im doing it wrong.
Regards
Please login with a confirmed email address before reporting spam
Posted:
5 years ago
18 janv. 2020, 06:21 UTC−5
Sanchayan,
Attached is multiturn coil.
Regards,
Sergei
Hei.
I have sorted the issue.
big thanks once again.
regards
>Sanchayan,
>
>Attached is multiturn coil.
>
>Regards,
>
>Sergei
Hei.
I have sorted the issue.
big thanks once again.
regards