Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
problem relative to variable material properties
Posted 20 déc. 2011, 02:07 UTC−5 Heat Transfer & Phase Change, Materials, Parameters, Variables, & Functions Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
(all are in the .pdf attachment. Thanks)
Hi, everyone,
Recently, I have tried to build a temperature-dependent material properties, but it fails because of some certain unknown reason. Would you mind checking it and giving me some guidance? Thanks a lot.
According to all what I know, I definite three "Piecewise function"s just under the Model 1 --> Materials --> Material 1 --> Basic branch, just shown in Fig. 1.
In order to check its validity, I defined a local variable with the name of “dp” (see Fig. 2) to visualize it. While after I solve the model, I come to the Result --> 2D plot group --> surface, and use the variable “dp” to present the expression to plot the density distribution in the domain, which should be different due to the temperature difference. The
“Unknown function or operator.
-Name : dTS
-Plot: surf1(Surface)”
error occurs. I am quite puzzle about this. Please give me some guidance. Thanks.
Best wishes to you and your family.
Yours
FM Huang
Dec.20th,2011
Attachments:
1 Reply Last Post 20 déc. 2011, 03:08 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I have solve this problem. because there is a Piecewise function under the "Material"--> "Basic" branch, hence , the right citation is
"mod1.mat1.def.d(mod1.T[1/k])" or similar (using the T instead).