Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Constructing an octahedron?

Posted 4 déc. 2019, 16:28 UTC−5 General, Geometry, Introduction 2 Replies

Skandan Chandrasekar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How do I construct an octahedron geometry?

2 Replies Last Post 5 déc. 2019, 02:38 UTC−5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 4 déc. 2019, 17:31 UTC−5
Updated: 5 years ago 4 déc. 2019, 12:33 UTC−5

See this old thread.

Best,

Jeff

-------------------
Jeff Hiller
See [this old thread](https://www.comsol.com/forum/thread/157341/randomized-hexagon-using-model-methods?last=2017-10-17T21:27:02Z). Best, Jeff
Magnus Ringh COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 5 déc. 2019, 02:38 UTC−5
Updated: 5 years ago 5 déc. 2019, 03:00 UTC−5

Hi Skandan,

In the latest release, COMSOL Multiphysics 5.5, the Part Libraries include an octahedron as well as all other Platonic solids.

See also https://www.comsol.com/blogs/how-to-use-the-platonic-solids-as-geometry-parts-in-comsol/.

Best regards,

Magnus Ringh, COMSOL

Hi Skandan, In the latest release, COMSOL Multiphysics 5.5, the Part Libraries include an octahedron as well as all other Platonic solids. See also . Best regards, Magnus Ringh, COMSOL

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content