Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Issues with boundaries

Posted 14 oct. 2019, 13:41 UTC−4 General, Computational Fluid Dynamics (CFD), Geometry Version 5.4 0 Replies

Luke Artzt
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

This is my first post on here, so thank you in advance for the help. I'm having an issue running a simulation that involves two separate flow streams: both water and air.

The air is simply flowing around a heated water pipe to model convection losses. However, I'm unable to assign the heat inflow or outflow for the water or air streams. I'm also unable to assign the laminar flow inlet and outlet for the air. It says "Not Applicable" for all of the selections.

I'd greatly appreciate any advice you may have, as I'm very new to the program. Thank you again.

Luke

0 Replies Last Post 14 oct. 2019, 13:41 UTC−4
COMSOL Moderator

Hello Luke Artzt

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content