Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Problem With Inducing Current In A Moving Conductor Place In Constant Magnetic Field

Posted 20 sept. 2019, 02:22 UTC−4 5 Replies

Nalladhimmu Pavan Kumar Reddy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have placed a moving aluminium conductor in a constant magentic field produced by a coil excied with constant voltage. I am unable to get any induced currents in the conductor. I am using magnetic fields physics and continuity is employed. displacement current density are ignored as i am using magnetic fields physics. And air medium is provided.

5 Replies Last Post 3 oct. 2019, 00:37 UTC−4
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 21 sept. 2019, 23:01 UTC−4

There is probably an error in your model. I encourage you to post the model to the forum so that others can look at it and help you.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
There is probably an error in your model. I encourage you to post the model to the forum so that others can look at it and help you.
S K Wahi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 22 sept. 2019, 10:03 UTC−4

You can use this link: https://www.comsol.co.in/model/voltage-induced-in-a-coil-by-a-moving-magnet-14163. May be it is useful for you.

You can use this link: https://www.comsol.co.in/model/voltage-induced-in-a-coil-by-a-moving-magnet-14163. May be it is useful for you.
Nalladhimmu Pavan Kumar Reddy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 22 sept. 2019, 23:31 UTC−4
Updated: 5 years ago 23 sept. 2019, 00:07 UTC−4

There is probably an error in your model. I encourage you to post the model to the forum so that others can look at it and help you.

Thank you for the reply This is my comsol file. I have set a rotating motion to the aluminum blades and the coil is excited to produce a constant magnetic field.

>There is probably an error in your model. I encourage you to post the model to the forum so that others can look at it and help you. Thank you for the reply This is my comsol file. I have set a rotating motion to the aluminum blades and the coil is excited to produce a constant magnetic field.

Attachments:

Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 28 sept. 2019, 04:28 UTC−4
Updated: 5 years ago 28 sept. 2019, 04:28 UTC−4

Hi,

this is better set up in a Rotating Machinery Magnetic (rmm) approach. Refer to the application library model in AC/DC Module > Motors and Actuators > generator 2D.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi, this is better set up in a Rotating Machinery Magnetic (rmm) approach. Refer to the application library model in AC/DC Module > Motors and Actuators > generator 2D. Cheers Edgar
Nalladhimmu Pavan Kumar Reddy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 3 oct. 2019, 00:37 UTC−4

I have now used rotating machinery, Everything looks fine but my coil output current for simulatio is different than the required output as in attached image below.

I have now used rotating machinery, Everything looks fine but my coil output current for simulatio is different than the required output as in attached image below.

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content