Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Comsol Beam Displacement Solution Very Off
Posted 18 sept. 2019, 13:30 UTC−4 Structural & Acoustics, Results & Visualization Version 5.3a 2 Replies
Please login with a confirmed email address before reporting spam
To verify my comsol results, I evaluated a round solid aluminum beam with the following specifications and load case:
beam diameter: 28mm beam length: 300mm
Physics: The beam is extruded in the z-direction Fixed Constraint: on the bottom face (3) Boundary Load: on the top face (4) of 1000N
Running a Stationary Study, I receive the following outputs: Volume Maximum Total Displacement (mm): 0.2741
I have verified this result against Fusion 360's NASTRAN solver and the analytical solution, both of which give me the following result: Total Deflection: 4.32mm
Am I overlooking something or is COMSOL outputting very wrong values?
Attachments:
Please login with a confirmed email address before reporting spam
Hi,
you entered a radius of 28 mm in the Comsol model. With 14 mm you get 4.33 mm displacement.
Cheers Edgar
-------------------Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Please login with a confirmed email address before reporting spam
That was a poor oversight on my part. Thank you so much for pointing this out.