Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Closed circuit flow using an interior fan (for a thermal energy storage design)
Posted 23 juil. 2019, 09:14 UTC−4 Computational Fluid Dynamics (CFD), Heat Transfer 0 Replies
Please login with a confirmed email address before reporting spam
The below post is related to an archived discussion
Hello,
I am currently working on the design of a thermal energy storage, and I would like to study convection and conduction in a closed-circuit flow, using an interior fan, but my model does not converge.
The model is described in the picture or in the Comsol file attached.
A double pipe in placed inside a tank. In the inner diameter of the pipe flows hot air with known parameters. In the outer diamater flows water, which enter at the bottom of the tank and exit at the top.
Am I using the interior fan node the wrong way? Do I necessarily need to put an inflow and an outflow node in the water tank part (because I feel like the software doesn't like that the tank where is applied 'turbulent flow' is nearly motionless) ?
Thank you in advance !
Attachments:
Hello Hugo Rouquie
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.