Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Recent Changes to Frames...

Posted 10 nov. 2011, 16:31 UTC−5 Version 4.2a 3 Replies

Andrew Prudil Nuclear Materials
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a question about how frames have been changed in recent versions of Comsol.

I have a model which includes the solid-mechanics module. In past versions of COMSOL there was an option for "deformation control spatial frame". I cannot find this option in 4.2a.

Currently, my material and spatial frame coordinates are equal. If I calculate r/R or z/Z they equal 1 for all my time-steps.

Any ideas how to enable deformed spatial frames?
3 Replies Last Post 13 nov. 2011, 19:17 UTC−5
Andrew Prudil Nuclear Materials
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12 nov. 2011, 22:36 UTC−5
I figured this out. The material and spatial frame variables only appear to be different in my model if I select the option for "include geometric non-linearity". I just figured I'd post here in case anyone else is having the same problem.
I figured this out. The material and spatial frame variables only appear to be different in my model if I select the option for "include geometric non-linearity". I just figured I'd post here in case anyone else is having the same problem.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13 nov. 2011, 03:55 UTC−5
Hi

I believe there are more here, thanks for pointing this out ;)

Below I have added an example model file of 4.2a change in "Solid Spatial Frame use:
I notice now (COMSOL pls correct if wrong ;) that the
Spatial Frame is always defined by a lower case x,y,z while the Material Frame is now always X,Y,Z. And the casing does not change dependent of selections, as before in the previous verions.

BUT: x=X+u, y=Y+v ... ONLY if
"Study - Stationary - (x) Include geometric non-linearity"
is checked (this point is NOT (yet?) mentionned in the related Dynamic Help pages).

But, the difference of small displacement and large displacements for the definition of the stress calculation is also (must be TBC) related to this check box, EXCEPT if the user has checked the
"Solid - Linear Elastic Material - (x) FORCE Linear Strain"
box. And this is explained at the end of the related Dynamic Help page.

This is so far my understanding, but I have not yet manage to identify all changes in the equation view due to the settings of these check boxes, such to consolidate my understanding

Pls take this as TBC so far (I'm not "COMSOL" and I do not know the interiour of the software more than any other user)

--
Good luck
Ivar
Hi I believe there are more here, thanks for pointing this out ;) Below I have added an example model file of 4.2a change in "Solid Spatial Frame use: I notice now (COMSOL pls correct if wrong ;) that the Spatial Frame is always defined by a lower case x,y,z while the Material Frame is now always X,Y,Z. And the casing does not change dependent of selections, as before in the previous verions. BUT: x=X+u, y=Y+v ... ONLY if "Study - Stationary - (x) Include geometric non-linearity" is checked (this point is NOT (yet?) mentionned in the related Dynamic Help pages). But, the difference of small displacement and large displacements for the definition of the stress calculation is also (must be TBC) related to this check box, EXCEPT if the user has checked the "Solid - Linear Elastic Material - (x) FORCE Linear Strain" box. And this is explained at the end of the related Dynamic Help page. This is so far my understanding, but I have not yet manage to identify all changes in the equation view due to the settings of these check boxes, such to consolidate my understanding Pls take this as TBC so far (I'm not "COMSOL" and I do not know the interiour of the software more than any other user) -- Good luck Ivar
Andrew Prudil Nuclear Materials
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13 nov. 2011, 19:17 UTC−5
That does clear some stuff up.
Thanks for the reply Ivar.
That does clear some stuff up. Thanks for the reply Ivar.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content