Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

emes in 4.2?

Posted 10 oct. 2011, 22:10 UTC−4 Version 4.2 1 Reply

Anis Nurashikin Nordin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,

How to find emes in comsol V4.2? emes refer to electrostatics in mems. Is emes is same with es in V4.2?

Thanks
1 Reply Last Post 11 oct. 2011, 08:18 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11 oct. 2011, 08:18 UTC−4
Hi

I suspect "emes" is now "es"
I agree these names has changed from 3.5 to v4, and I was missing a simple page 3.5 to 4 too, but now I simply try to think fully "v4", and forget older 3.5, and it works too, in the beginning you need to re-read a bit more ;)

--
Good luck
Ivar
Hi I suspect "emes" is now "es" I agree these names has changed from 3.5 to v4, and I was missing a simple page 3.5 to 4 too, but now I simply try to think fully "v4", and forget older 3.5, and it works too, in the beginning you need to re-read a bit more ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content