Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

coalescence of 2 particles under surface tension of surrounding medium

Posted 6 févr. 2019, 04:14 UTC−5 2 Replies

Hesham Abdeldaim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,

i am a phd student and I am stucked in an important model in my phd thesis. I am trying to model the coalesence of 2 visoelastic polymer particles under the surface tension pressure of the surrounding water medium.

please can help me in which modules I have to use to model this coalesence?

Thanks in advance

2 Replies Last Post 7 févr. 2019, 08:13 UTC−5
Dara Bayat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 6 févr. 2019, 08:05 UTC−5
Updated: 6 years ago 6 févr. 2019, 08:06 UTC−5

Hi,

probably you can use FSI (fluid structure interaction) and 2 phase flow

probably the best way to start is to do some tutorials first:

https://www.comsol.com/model/inkjet-nozzle-8212-level-set-method-1445

https://www.comsol.com/model/two-phase-flow-with-fluid-structure-interaction-fsi-in-3d-4515

hope this helps

Hi, probably you can use FSI (fluid structure interaction) and 2 phase flow probably the best way to start is to do some tutorials first: https://www.comsol.com/model/inkjet-nozzle-8212-level-set-method-1445 https://www.comsol.com/model/two-phase-flow-with-fluid-structure-interaction-fsi-in-3d-4515 hope this helps
Hesham Abdeldaim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 7 févr. 2019, 08:13 UTC−5

Thank you for your answer

the problem that i face that i can't use the surfac etension for the fluid module to intertact with the solid in the structure mechanics module

because the surface tension can be applied only to fluid-fluid interface while i have to add the viscoelastic properties through the solid mechanics module

Thank you for your answer the problem that i face that i can't use the surfac etension for the fluid module to intertact with the solid in the structure mechanics module because the surface tension can be applied only to fluid-fluid interface while i have to add the viscoelastic properties through the solid mechanics module

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content