Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Need the Elasticity matrix, coupling matrix, relative permittivity values of structural steel

Posted 23 déc. 2018, 10:43 UTC−5 Version 5.2 3 Replies

S Bestley Joe
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, Came up in developing a piezoelectric energy harvesting model and included structural steel in between. But after including domains it showed this error

Need the Elasticity matrix, coupling matrix, relative permittivity values of structural steel in figure. Kindly help me in this regard

Attachments:

3 Replies Last Post 23 déc. 2018, 23:09 UTC−5
Dave Greve Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 23 déc. 2018, 13:13 UTC−5
Updated: 6 years ago 23 déc. 2018, 22:09 UTC−5

If you make steel a linear elastic material (as it is) you will not need these parameters.

If you make steel a linear elastic material (as it is) you will not need these parameters.
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 23 déc. 2018, 13:59 UTC−5

You must remove the steel domains from the piezoelectric material model node and put it into a linear elastic model node.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
You must remove the steel domains from the piezoelectric material model node and put it into a linear elastic model node.
S Bestley Joe
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 23 déc. 2018, 23:09 UTC−5
Updated: 6 years ago 27 déc. 2018, 03:39 UTC−5

Thanks so much all. Cleared the problem.

Thanks so much all. Cleared the problem.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content