Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Export data from a single subdomain v3.5a

Posted 15 août 2011, 18:09 UTC−4 Version 3.5a 1 Reply

Tanaya Kawakami
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a geometry with 4 subdomains. I have no problem exporting postprocessing data for the entire geometry. I would like to know if it is possible,to export the postprocessing data from a single subdomain.

Thank you very much,
Tanaya
1 Reply Last Post 17 août 2011, 04:22 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17 août 2011, 04:22 UTC−4
Hi

have you tried to right click the Data Sets node and extract i,e make a new Solution node for a selected part (domain, boundary ...) of your full model ?

check the doc on the Data Sets node

Sorry that is easy in v4,
now I cannot really remember how it was back in 3.5

--
Good luck
Ivar
Hi have you tried to right click the Data Sets node and extract i,e make a new Solution node for a selected part (domain, boundary ...) of your full model ? check the doc on the Data Sets node Sorry that is easy in v4, now I cannot really remember how it was back in 3.5 -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content