Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Time dependent magnetic field
Posted 9 nov. 2018, 04:32 UTC−5 Low-Frequency Electromagnetics, Results & Visualization, Studies & Solvers Version 5.3a 0 Replies
Please login with a confirmed email address before reporting spam
Hello everyone!
Task: the conductor is affected by a given current pulse (duration 0.24 ns), the rate of rise and fall of the pulse is 100 kA / μs. Copper conductor has dimensions of 16x52x1 mm and is surrounded by an air sphere.
Problem: When solving my model the magnetic induction in the conductor does not change when the current changes. This produces an incorrect graph for the output voltage - it repeats the shape of the current, although the influence of inductance should be taken into account
Images: 1 - expected graphics. The voltage at the ends of the conductor should be as in the (3) graph, but it turns out that it only repeats the shape of the current (2) graph 2 - resulting voltage 3 - resulting magnetic field 4 - current pulse 5 - magnetic field parameters
My model (comsol 5.3a) - https://yadi.sk/d/JSfo8MDrAsdWEA
Thanks
Hello Pavel Karpunin
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.