Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Mixed mesh elements

Posted 30 juin 2011, 02:57 UTC−4 Mesh Version 4.1, Version 4.2 3 Replies

mb
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

for special cases, where there are high gradients very locally in a large domain, it would be useful to be able to mesh around this area very fine with linear elements and further away to have coarser but higher-order elements.

Is this possible? I only found the global choice of element order type in the Discretization tab under the physics node.

Thanks,
Marcel
3 Replies Last Post 1 juil. 2011, 02:17 UTC−4
Shuo Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 30 juin 2011, 06:53 UTC−4
you can try the feature "Refine Elements in Box"
(right click "Mesh">"More operations">"Refine", then locate the "Refine Elements in Box" option in the Settings window)
that way you can refine a specific area as you wish.
you can try the feature "Refine Elements in Box" (right click "Mesh">"More operations">"Refine", then locate the "Refine Elements in Box" option in the Settings window) that way you can refine a specific area as you wish.
Onur Ilkorur
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 30 juin 2011, 09:52 UTC−4
If your model enables such a change; you can divide your geometry into sections with boolean operations. You can create a section in which your detailed geometry resides and you can create another section in which you can apply a coarse mesh. Between the sections, it will be continuity boundary condition.
/Hope it helps,
Onur
If your model enables such a change; you can divide your geometry into sections with boolean operations. You can create a section in which your detailed geometry resides and you can create another section in which you can apply a coarse mesh. Between the sections, it will be continuity boundary condition. /Hope it helps, Onur
mb
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 1 juil. 2011, 02:17 UTC−4
Thanks so far,

I know that it is possible to use different mesh densities in different domains. But is it also possible to use elements of different shape order?

Regards
Thanks so far, I know that it is possible to use different mesh densities in different domains. But is it also possible to use elements of different shape order? Regards

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content