Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

failed to evaluate variable jacobian

Posted 26 avr. 2011, 13:05 UTC−4 2 Replies

John Pradeep
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I am using piezomodule in comsol 4.0a. When performing time domain analysis the above error is being popped. Please help in fixing the problem.
Regards,
John
2 Replies Last Post 1 juil. 2011, 01:47 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 avr. 2011, 14:24 UTC−4
Hi

there are several possibilities, either missing BC's or more probable in v4.0, the solver sequence is not always updated correctly on the fly, if you change your model and solvers during work, in V4 I noticed that you often need to DELETE the solver sequence fully and regenerate a fresh new one, only annoying thing, you loose also all the Results settings.

This is fixed, or at least far better controlled, in V4.1

--
Good luck
Ivar
Hi there are several possibilities, either missing BC's or more probable in v4.0, the solver sequence is not always updated correctly on the fly, if you change your model and solvers during work, in V4 I noticed that you often need to DELETE the solver sequence fully and regenerate a fresh new one, only annoying thing, you loose also all the Results settings. This is fixed, or at least far better controlled, in V4.1 -- Good luck Ivar
comsol newbie
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 1 juil. 2011, 01:47 UTC−4
So, that means each time you change a setting somewhere you have to go and delete the previous one? I am using v3.4. How do you delete the previous settings?
So, that means each time you change a setting somewhere you have to go and delete the previous one? I am using v3.4. How do you delete the previous settings?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content