Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

epoxy silica nano-composite material simulation

Posted 25 avr. 2011, 04:50 UTC−4 Low-Frequency Electromagnetics Version 4.0a 2 Replies

Shwetha D J
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am doing a project on simulation of electrical properties of epoxy-silica nano-composite material. The electrical properties include resistivity, loss tangent, relative permittivity, voltage and thermal breakdown, with the variation in concentration of silica fillers. The boundary conditions applied are similar to parallel plate capacitor i.e., upper surface is given an ac voltage, lower surface is grounded and the side boundaries are given periodic conditions.

After composing the domains of randomly placed silica nano-fillers in the epoxy matrix i am not able to find the relative permittivity of the whole composite material with change in both voltage and frequency.

I am able to attach only one reference paper.

But I am unable to attach the models that i have worked so far.

Thank you.:)

Attachments:

2 Replies Last Post 2 mars 2014, 15:28 UTC−5
COMSOL Moderator

Hello Shwetha D J

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Basil Roy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 24 juin 2013, 02:53 UTC−4

After composing the domains of randomly placed silica nano-fillers in the epoxy matrix i am not able to find the relative permittivity of the whole composite material with change in both voltage and frequency.



So i figure you successfully modeled it. Its not clear where you encountered problem. From reading your reference paper i think you have to plot the variation of Net Electric field inside the matrix and thus find the max and min value of E.

Using these values and fraction of loading, you can find the effective permittivity using any of effective medium theory equations, Bruggeman for instance.

Drop a reply if you have any doubts..
[QUOTE] After composing the domains of randomly placed silica nano-fillers in the epoxy matrix i am not able to find the relative permittivity of the whole composite material with change in both voltage and frequency. [/QUOTE] So i figure you successfully modeled it. Its not clear where you encountered problem. From reading your reference paper i think you have to plot the variation of Net Electric field inside the matrix and thus find the max and min value of E. Using these values and fraction of loading, you can find the effective permittivity using any of effective medium theory equations, Bruggeman for instance. Drop a reply if you have any doubts..
Venkatesh Doddapaneni
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 mars 2014, 15:28 UTC−5
Hi, I am interested to know how you managed to fix your problem!!
Have you succeeded?

Looking forward for your reply
Hi, I am interested to know how you managed to fix your problem!! Have you succeeded? Looking forward for your reply

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content