Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Gas flow through a porous medium using COMSOL
Posted 8 janv. 2018, 22:34 UTC−5 Fluid & Heat, Computational Fluid Dynamics (CFD), Heat Transfer Version 5.1, Version 5.2, Version 5.2a, Version 5.3, Version 5.3a 1 Reply
Please login with a confirmed email address before reporting spam
Model type: 1 D Geometry: Nitrogen gas (viscosity = 1.75x10-5) will flow through a length of 644m (hardened cement paste of porosity = 0.05 and permeability = 4x10-16 m2). Initial condition, p= ambient pressure Boundary Condition: At x=0, P=15Mpa (Constant pressure) and x= 644m, V=1m3 Output required: Pressure build up at x = 644 with time
Can it be done using COMSOL? Is there anyone who can shed some light? If it works we might get this software
Please login with a confirmed email address before reporting spam
I would say YES!!
Best Regards Michael Rembe
-------------------Michael Rembe
Rembe Consulting PartG mbB
www.rembe-consulting.de