Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Pipe leakage detection

Please login with a confirmed email address before reporting spam

Hello !

I need related files or tutorials of pipe leakage detection .

thanks


5 Replies Last Post 6 janv. 2018, 11:31 UTC−5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 30 nov. 2017, 09:24 UTC−5
Updated: 7 years ago 30 nov. 2017, 09:29 UTC−5

Hello Lin,

There was a keynote presentation at last year's COMSOL Conference in Boston on using COMSOL for the detection of pipe leakage. Here is the video:

https://www.comsol.com/video/keynote-predicting-leak-locations-in-pipes-with-simulation

The slides are here:

http://cdn.comsol.com/resources/2016-keynotes/boston/Perrier-On_the_Accuracy_of_Predicting_Leak_Location_in_Fluid-Filled_Pipes.pdf

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Lin, There was a keynote presentation at last year's COMSOL Conference in Boston on using COMSOL for the detection of pipe leakage. Here is the video: https://www.comsol.com/video/keynote-predicting-leak-locations-in-pipes-with-simulation The slides are here: http://cdn.comsol.com/resources/2016-keynotes/boston/Perrier-On_the_Accuracy_of_Predicting_Leak_Location_in_Fluid-Filled_Pipes.pdf Best regards, Jeff

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 3 déc. 2017, 03:23 UTC−5

thankyou very much , yes I have these but I need related tutorial using comsol multiphysics

thankyou very much , yes I have these but I need related tutorial using comsol multiphysics

Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 4 déc. 2017, 08:28 UTC−5

This particular work was authored by one of COMSOL's commercial clients, so there are no tutorials available for it. Their work uses the Pipe Flow Module. For tutorials for the Pipe Flow Module, if you do have that product on your license, go to File > Application Libraries > Pipe Flow Module. If you do not have a license for the Pipe Flow Module, you will find tutorials here instead: https://www.comsol.com/models/pipe-flow-module .

Best regards,

Jeff

-------------------
Jeff Hiller
This particular work was authored by one of COMSOL's commercial clients, so there are no tutorials available for it. Their work uses the Pipe Flow Module. For tutorials for the Pipe Flow Module, if you do have that product on your license, go to File > Application Libraries > Pipe Flow Module. If you do not have a license for the Pipe Flow Module, you will find tutorials here instead: https://www.comsol.com/models/pipe-flow-module . Best regards, Jeff

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 1 janv. 2018, 12:59 UTC−5

Can you please guide me with its geometry I want to draw pipe with two sensors inserted on it one act as transmitter other act as receiver .

Can you please guide me with its geometry I want to draw pipe with two sensors inserted on it one act as transmitter other act as receiver .

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 6 janv. 2018, 11:31 UTC−5

Hello !

Can I design leakage detection system with acoustic sensors and valves which act as leakage detection points and and want to control manually using comsol ?

Hello ! Can I design leakage detection system with acoustic sensors and valves which act as leakage detection points and and want to control manually using comsol ?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.