Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

COMSOL module and functionality for acoustic simulation of large room

Please login with a confirmed email address before reporting spam

I would like to use comsol for my project which deals with time domain acoustic simulation (in ultrasound domain) of a large room. Of Special interest are following:

1). Placing of multiple source at various location in a room. 2). For each source I want to specify what kind of signal it should emit. (could be a chirp, a sine burst or an Impulse). 3). Setting the reflection coefficient walls. 4). placing of multiple receivers in the room. 5). sound pressure level at each receiver. 6). Visualization of reflections from the wall.

I would like to request , if anyone knows weather simulation with these functionalities is possible or not in COMSOl, and if yes, what all modules do I need, then please let me know. As per my research I would need Multiphysics and Acoustics.


2 Replies Last Post 21 nov. 2017, 08:43 UTC−5

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 20 nov. 2017, 09:53 UTC−5

Dear akjain,

please see my answer in the Support Center : https://www.comsol.de/support. Best regards, Gilles

Dear akjain, please see my answer in the Support Center : https://www.comsol.de/support. Best regards, Gilles

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 21 nov. 2017, 08:43 UTC−5

Dear akjain,

please see my answer in the Support Center : https://www.comsol.de/support. Best regards, Gilles

Hi Gilles,

Can you also send your answer to me, as we have a similar problem over here.

Kind regards, Steven

>Dear akjain, > >please see my answer in the Support Center : https://www.comsol.de/support. >Best regards, >Gilles Hi Gilles, Can you also send your answer to me, as we have a similar problem over here. Kind regards, Steven

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.