Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Maximum of an auxiliary sweep
Posted 3 avr. 2017, 08:03 UTC−4 Parameters, Variables, & Functions Version 5.2a 0 Replies
Please login with a confirmed email address before reporting spam
Using a auxiliary sweep I evaluate a 3D solid mechanics model for subsequent prescribed deformations. Anywhere in that auxiliary sweep I expect a maximum and minimum value of the results I am interested in (total energy, center of mass, etc.).
I want to use these values in a comsol optimization solver. So the steps I want to take:
1) Initialize the design
2) run a auxiliary sweep [lets say: "SWEEP: range(0,0.1,1)"]
3) select a maximum value [let say: "max(solid.Ws_tot)"]
4) assign that value to the optimization solver
5) Go back to 2 until convergence.
I know how to take all these steps, except step 3. I know the maximum operator (maximum as function of the volume) and the attimemax function (maximum as function of the time), but both cannot be used to evaluate a maximum as function of a sweep parameter.
Can anyone help me out?
Kind regards,
Rijk
Hello Rijk van Manen
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.