Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Plotting unwrapped phase

Posted 26 nov. 2010, 12:04 UTC−5 Acoustics & Vibrations, Parameters, Variables, & Functions Version 4.3b 4 Replies

Tom Alexander Solgård
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam


I am plotting the phase response of a loudspeaker, and I want to unwrap it (like what the Matlab command unwrap() does)

www.mathworks.com/help/techdoc/ref/unwrap.html

Any ideas?
4 Replies Last Post 30 août 2013, 07:50 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 nov. 2010, 17:44 UTC−5
Hi

good remark, I have looked for something like that too, the atan2(,) I normally use does not unwrap ;)

--
Good luck
Ivar
Hi good remark, I have looked for something like that too, the atan2(,) I normally use does not unwrap ;) -- Good luck Ivar
Tom Alexander Solgård
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 3 déc. 2010, 12:13 UTC−5

Is it possible to use a Matlab function like unwrap() inside Comsol Desktop in some way?
Is it possible to use a Matlab function like unwrap() inside Comsol Desktop in some way?
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 4 déc. 2010, 07:43 UTC−5
Hi

probably yes, as there is the "external" function operator, but I have never tried it (yet) in V4

--
Good luck
Ivar
Hi probably yes, as there is the "external" function operator, but I have never tried it (yet) in V4 -- Good luck Ivar
Ysbrand Wijnant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 30 août 2013, 07:50 UTC−4
I use the unwrap function (as an external Matlab function) but get very strange results while plotting ... added a post about it. The phase doesn't become smooth using unwrap in Comsol, instead it shows a lot of phase jumps ??? We (2 PhD's and I) have been struggling and we can't find the problem ...
I use the unwrap function (as an external Matlab function) but get very strange results while plotting ... added a post about it. The phase doesn't become smooth using unwrap in Comsol, instead it shows a lot of phase jumps ??? We (2 PhD's and I) have been struggling and we can't find the problem ...

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content