Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

what is the difference between lumped port and wave port?

Please login with a confirmed email address before reporting spam

SIr,

what is the difference between lumped port and wave port?.i got so many examples with lumped port, can you please provide me examples with wave port?.

I want to define wave port for my structure. My structure is having 3 metal lines of CPW, with center conductor as a signal and outer two conductor are ground lines. so what port shall i define, i mean lumped port or wave port?

Thank you.

1 Reply Last Post 29 oct. 2010, 07:56 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 29 oct. 2010, 07:56 UTC−4
Hi

I'm not a speciaist for port use in ACDC/ or RF, but is you read carefully through the new doc on "port" (RF and ACDC) you should get the subtilities.

I assume (but might wrong) that you are interested in "lumped ports" for your case

--
Good luck
Ivar
Hi I'm not a speciaist for port use in ACDC/ or RF, but is you read carefully through the new doc on "port" (RF and ACDC) you should get the subtilities. I assume (but might wrong) that you are interested in "lumped ports" for your case -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.