Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to calculate the impedance of copper wire using AC/DC

Posted 9 févr. 2016, 08:27 UTC−5 Low-Frequency Electromagnetics 2 Replies

Bin Sun
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am building the power cable using COMSOL AC/DC model. I want to ask if we have a copper wire, can we calculate the impedance of this wire? Should we use which interface(like es or ec)? should we have to use 3D model? Should we add some special constraint condition in physics? If there is any related examples, please share with me.


Thank you very much!

Best regards,

Bin
2 Replies Last Post 24 févr. 2016, 18:41 UTC−5
Nirmal Paudel COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 9 févr. 2016, 14:54 UTC−5
Hi Bin,

You could calculate coil inductance both in 2D and 3D. We have several examples available in the Applications Gallery, in particular the following examples in 2D-axisymmetry will be useful.
1. www.comsol.com/model/mutual-inductance-and-induced-currents-between-single-turn-coils-12653
2. www.comsol.com/model/mutual-inductance-and-induced-currents-in-a-coil-group-12679
3. www.comsol.com/model/mutual-inductance-and-induced-currents-in-a-multi-turn-coil-12687

Note that these examples are for the mutual inductance calculations using Single Turn Coil, Multi-Turn Coil and Coil Group feature. These features are also applicable to directly compute the inductance for a single coil or wire.
For 3D case, take a look at this power inductor example:
www.comsol.com/model/modeling-of-a-3d-inductor-10299

In addition, the following two blog posts will be useful here:
www.comsol.com/blogs/model-cables-and-transmission-lines-in-comsol-multiphysics/
www.comsol.com/blogs/computing-the-inductance-of-a-wire/

Hope this will be useful.

Best Regards,
Nirmal
Hi Bin, You could calculate coil inductance both in 2D and 3D. We have several examples available in the Applications Gallery, in particular the following examples in 2D-axisymmetry will be useful. 1. http://www.comsol.com/model/mutual-inductance-and-induced-currents-between-single-turn-coils-12653 2. http://www.comsol.com/model/mutual-inductance-and-induced-currents-in-a-coil-group-12679 3. http://www.comsol.com/model/mutual-inductance-and-induced-currents-in-a-multi-turn-coil-12687 Note that these examples are for the mutual inductance calculations using Single Turn Coil, Multi-Turn Coil and Coil Group feature. These features are also applicable to directly compute the inductance for a single coil or wire. For 3D case, take a look at this power inductor example: http://www.comsol.com/model/modeling-of-a-3d-inductor-10299 In addition, the following two blog posts will be useful here: http://www.comsol.com/blogs/model-cables-and-transmission-lines-in-comsol-multiphysics/ http://www.comsol.com/blogs/computing-the-inductance-of-a-wire/ Hope this will be useful. Best Regards, Nirmal
Bin Sun
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 24 févr. 2016, 18:41 UTC−5
Thank you so much. It is very helpful.
Thank you so much. It is very helpful.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content