Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Magnetic Flux Density Around a current carrying conductor
Posted 4 févr. 2016, 02:08 UTC−5 Low-Frequency Electromagnetics, Geometry, Materials, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 5.0 1 Reply
Please login with a confirmed email address before reporting spam
I am using Comsol 5.0.
How to model and simulate the magnetic flux density around a current carrying conductor?
Please explain the step by step procedure.
Thank you.
How to model and simulate the magnetic flux density around a current carrying conductor?
Please explain the step by step procedure.
Thank you.
1 Reply Last Post 4 févr. 2016, 12:14 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi Karthik,
The following few examples demonstrate the technique of modeling conductor and the magnetic flux density around it. The second example also discuss about the induced/eddy currents.
1. www.comsol.com/model/electromagnetic-forces-on-parallel-current-carrying-wires-131
2. www.comsol.com/model/induction-currents-from-circular-coils-124
Hope these examples will be useful.
Best Regards,
Nirmal
The following few examples demonstrate the technique of modeling conductor and the magnetic flux density around it. The second example also discuss about the induced/eddy currents.
1. www.comsol.com/model/electromagnetic-forces-on-parallel-current-carrying-wires-131
2. www.comsol.com/model/induction-currents-from-circular-coils-124
Hope these examples will be useful.
Best Regards,
Nirmal