Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Strange asymetric capture on permanent magnets
Posted 11 oct. 2010, 17:27 UTC−4 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I have a 3D model with permanent magnet (in shape of a cube) which captures magnetic particles on to it. However, the particles seem to get attracted to a random point on one of the edges of the magnet . Is there any reason why symmetry is lost?
I tried varying the spatial and time discretization and parameter values but found that eventually the particles got accumulated in an asymmetrical manner.
Any help will be appreciated.
Thanks!!
I have a 3D model with permanent magnet (in shape of a cube) which captures magnetic particles on to it. However, the particles seem to get attracted to a random point on one of the edges of the magnet . Is there any reason why symmetry is lost?
I tried varying the spatial and time discretization and parameter values but found that eventually the particles got accumulated in an asymmetrical manner.
Any help will be appreciated.
Thanks!!
1 Reply Last Post 12 oct. 2010, 02:10 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Depending on the mesh resolution you might have some field concentration effects along sharp edges or vertexes, that I believe could influence the flow of your particles.
Chck carefully the field pattern and use a linear mesh resolution not, a smoothened view, this might give you a clue
--
Good luck
Ivar
Depending on the mesh resolution you might have some field concentration effects along sharp edges or vertexes, that I believe could influence the flow of your particles.
Chck carefully the field pattern and use a linear mesh resolution not, a smoothened view, this might give you a clue
--
Good luck
Ivar