Discussion Forum

Forum Home

New Discussion

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

inquiry on how to get the numerical solution

Posted 10 oct. 2010, 03:03 UTC−4 2 Replies

Jonathan Perez

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello fellow readers and Dear Moderators,

Greetings.
I just would like to ask on how i could obtain the numerical values from the multiphysics that i had run.
so far i was able to run correctly the simulation on the thermal diffusion but only the 3D graph is only available.
I already tried running the graph on 1D but to no avail.
Any idea on how i could the get values so that i could compare the simulated values with the experimental results.

I appreciate much of your suggestions.
Thank you and God bless.

Jonathan

2 Replies Last Post 10 oct. 2010, 20:19 UTC−4

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi

if you are in V4, plot out a cut line data andcut&paste it into Excel, or an simple txt file.

In 3.5 I usually used matlab with a postinterp onto a self defined grid

--
Good luck
Ivar

Jonathan Perez

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Dear Mr. Ivar,

Thanks for the help.
I will try what you have said.
Thanks again and May God bless you.

Jonathan

Note that while COMSOL employees may participate in the discussion forum, COMSOL^® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Discussion Forum

inquiry on how to get the numerical solution

Suggested Content